Features and specifications – Wine-Mate SSWWC Series User Manual
Page 5
- 4 -
Features and Specifications
• Wine-Mate wall split cooling systems WM-1500~2500SSW are designed and
used to provide a cold temperature between 50~65 °F for a properly insulated
wine cellar.
• The wine cellar will maintain humidity range within 50~70% RH.
• These temperature and humidity ranges like in natural caves are optimized
for long term storage of wine.
• SSW units consist of a condensing unit and an evaporator unit; they are
connected by a liquid line and an insulated suction line.
• SSW condensing units can be located away from the wine cellars 50 ft so that
noise and compressor vibration are isolated.
• SSW evaporator units can be installed inside a wine rack or between two wall
studs, making them an idea choice for wine cabinets or small wine rooms.
Fig. 1 SSW Wall Split Cooling System
NOTE:
Capacity is determined under the cellar, the cellar ambient and the
condensing unit ambient temperatures of 55°F, 75°F and 90°F, with R13
interior and R19 exterior insulations. Any higher ambient temperatures,
lower insulations will cause reducing capacity and the cellar temperature
may not be maintained at 55°F.
CAUTION:
If the installation area will be below 50°F, purchase a low ambient condition
kit.