beautypg.com

Features and specifications – Wine-Mate SSD Series User Manual

Page 5

background image

- 4 -

Features and Specifications

• Wine-Mate ceiling mount split cooling systems WM-2500~8500SSD are

designed and used to provide a cold temperature between 50~65 °F for a
properly insulated wine cellar.

• The wine cellar will maintain humidity range within 50~70% RH.

• These temperature and humidity ranges like in natural caves are optimized

for long term storage of wine.

• SSD units consist of a condensing unit and an evaporator unit; they are

connected by a liquid line and an insulated suction line.

• SSD condensing units can be located away from the wine cellars 50 ft so that

noise and compressor vibration are isolated.

• SSD evaporator units provide two way air supply operation. The evaporator

units can be installed on the ceiling in the center of a wine cellar.

Fig. 1 SSD Ceiling Split Cooling System


NOTE:
Capacity is determined under the cellar, the cellar ambient and the
condensing unit ambient temperatures of 55
°F, 75°F and 90°F, with R13
interior and R19 exterior insulations. Any higher ambient temperatures,
lower insulations will cause reducing capacity and the cellar temperature
may not be maintained at 55
°F.

CAUTION:
If the installation area will be below 50°F, purchase a low ambient condition
kit.