Wine Guardian Through-the-Wall Wine Cellar Cooling Systems 50Hz (WG25) - Manual - Manual (Page 30)

30
Deg F or Deg C Setting 1

Press the “Down” arrow to change temperature
from Deg F to Deg C.

Press the “Up” arrow to change temperature
from Deg C to Deg F.
Low temperature
alarm set point Setting 2

Press “Mode” button to advance to Setting 2.

Press the “Up” or “Down” arrow buttons to
adjust to the desired set point. Factory default
is 10 Deg. C.
High temperature
alarm set point Setting 3

Press “Mode” button to advance to Setting 3.

Press the “Up” or “Down” arrow buttons to
adjust to the desired set point. Factory default
is 18 Deg C.
Low humidity
alarm set point Setting 4

Press “Mode” button to advance to Setting 4.

Press the “Up” or “Down” arrow buttons to
adjust to the desired set point. Factory default
is 5%.
High humidity
alarm set point Setting 5

Press “Mode” button to advance to Setting 5.

Press the “Up” or “Down” arrow buttons to
adjust to the desired set point. Factory default
is 95%.
Add or remove
humidifier
Setting 6

Press “Mode” button to advance to Setting 6.

Press the “Up” or “Down” arrow buttons to
adjust to the desired set point. Factory default
is zero (0).
Zero (0) = No humidifier
Two (2) = Stand-alone remote mounted
Fan AUTO or ON
Setting 7

Press “Mode” button to advance to Setting 7.

Press the “Up” or “Down” arrow buttons to
adjust number to the desired set point. Factory
default is zero (0).
Zero (0) = Auto – fan only turns on when
there is a call for cooling or heating
One (1) = Fan On – fan remains on
continuously
Advanced Settings- Setting 8
Advanced Settings