Campbell Hausfeld CC640 - Manual (Page 47)

Appendix A. Camera Enclosures
1. ENC 16/18-CC
The ENC16/18-CC enclosure provides a means of housing the camera along with
other equipment such as a datalogger and modem. The ENC 16/18-CC enclosure
uses the same fibreglass enclosure and mounts as the standard ENC 16/18
enclosure. The ENC 16/18-CC includes the following additional items to
facilitate the camera:
• A 100mm x 100mm window (4”x4”) is placed on the latch side of the
enclosure
• A mounting plate and grommets are included for mounting the camera on
the back-plate.
• The external sun-shroud reduces glare from the sun as well as provides
protection from rain and snow.
Using the ENC 16/18-CC enclosure eliminates the need for the external wiring
required if a separate housing is used for the camera.
Figure A-1 Enc 16/19 Mounting
A-1