Vetter Flexible packers - Manual (Page 15)

Article No. 9987046700 | © Vetter GmbH I 09/14 I Changes and errors excepted.
Emergency Pneumatics.
Assembly Instructions
Packer carriage small
www.vetter.de
1. Inventory check
Accessories for assembly
Chassis 6 x
Cylinder head screw M6x8 12 x
Washer 12 x
Hexagon head screw M10x50 6 x
Self-locking nut M10 6 x
Roll 6 x
2. Assembly Instructions
For the assembly of each chassis you need 2
cylinder head screws M6x8 and 2 washers.
The seperate chassis must be tightened by a
5 mm allen key with 12 Nm.
The rolls have to be applied with the hexa-
gon head screw M 10 as an axis and must
be tightened with the self-locking nut M 10
with 54 Nm.
These carriages are to be used with the following packers:
9 Short packer 150-200 (Art. No. 1491000100)
9 Flexible packer 150-250 (Art. No. 1491045900)