Vetter Mini Permanent Aspirator MPA 2.0 MWF(EU) - Manual (Page 14)

– 3
Caution
Prior to dry vacuuming: Remove the dis-
posal pump and install the flat fold filter.
Note: You must use a flat fold filter during
dry vacuuming.
Caution
The flat pleated filter must always be in
place while vacuuming.
– To vacuum fine dust, you can also use
an additional paper filter bag (optional).
 Unplug the mains plug of the disposal
pump.
 Release and remove the suction head.
Illustration

Unscrew the acorn nut of the disposal
pump.
 Remove the cable holder of the dispos-
al pump and replace it with a locking
cap.
 Remove the disposal pump and the
plastic insert from the container.
Illustration

Install the locking cap instead of the dis-
posal hose.
 Insert and lock the suction head.
Note: The flat fold filter is not included in
the delivery.

Open filter door.
 Take out the coarse dirt filter.
 Install the flat fold filter.
 Close the filter door, it must lock into
place.
Illustration

Remove the rubber lips.
 Install the brush strip.
Illustration

Release and remove the suction head.
 Insert the paper filter bag (optional).
 Insert and lock the suction head.
 Turn the adjustment screw in a clock-
wise direction: High position of the floor
nozzle
 Turn the adjustment screw in an anti-
clockwise direction: Low position of the
floor nozzle
Illustration
The suction hose is equipped with a clip
system. All C-40/C-DN-40 accessories can
be connected.
ƽ
Danger
Risk of injury and damage! The socket out-
let is intended only for the direct connection
of the disposal pump. Any other use of the
socket outlet is not permitted.
 Plug in the mains plug of the appliance.
A Switch on button
B Switch off button/test key
C Circuit breaker
D Red indicator lamp

Press the switch on button (the red indi-
cator lamp is ON). The protection
switch is now ready for operation.
Dry vacuum cleaning
General
Removal of the disposal pump
Installation of flat fold filter
Install the brush strip
Inserting the paper filter bag
Height adjustment of the floor nozzle
Clip connection
Operation
Turning on the Appliance
ON
I
TEST
O A
D
B C
14 EN