Universal Remote Control (URS) RFTX-1 - Manual (Page 5)

Page 2
RFTX-1 B
ASE
S
TATION
Parts Guide
The RFTX-1 Transmitter includes:
Installation
1. Plug the RFTX-1 into the RFTX jack of the IP or ZBand base station. The Red
Power LED should light.
2. Select either the 418 or 433.92 band utilizing the switch on the side of the
RFTX-1.
3. Place the RFTX-1 in a location away from microprocessor based AV compo-
nents and any metal walls or structure.
Note: The RF LED will light whenever the RFTX-1 transmits.
Specifications
RF Range (radio frequency): 50 to 100 feet, depending upon the environment
RF Frequency: 418MHz or 433.92 MHz (User Selectable)
Weight: 2.9 ounces
Size: 1.5” H x 2.25” W x .45” D
1 - RFTX-1 Transmitter
1 - Mounting Plate for wall mounting the RFTX-1
2 - Screws for wall mounting
1 - 10’ Connecting cable to the MRZ-260