Universal Remote Control (URS) SNP-2 - Manual (Page 8)

Page 5
SNP-2 S
TREAMING
N
ETWORK
P
LAYER
Installation
Total Control Interface View Only (Streaming Audio Device)
The SNP-2 can be used as a streaming audio device in up to 32
zones by broadcasting its proprietary audio signal over the local
area network to the Total Control system. The signal is then received
by a DMS-100, DMS-1200 or a DMS-AV, all while the user controls
the music selection from one of the Total Control interfaces like the
TRC-1080.
1. Plug the power cord into the rear of the SNP-2 and the other
end into a power outlet.
2. Plug the Ethernet RJ45 cable to the LAN port in the rear of
the SNP-2 and plug the other end into an available port of a
MFS-8 or router.
3. Control the SNP-2 directly from a Total Control interface such
as a TRC-1080. (Requires the Custom Professional to
download the program to the Total Control system.)
TRC-1080