Cavalry Storage CADA-U32A User Manual
Page 15
9.
Your jumper block should look something like this when finished changing
settings. Shown is RAID 0 (striping) with pins 1, 2, 5, and 6 covered. Note
that the jumper shunts are oriented along the longest axis of the drive.
10. Replace the cover of your CADA-U32. With your disk array connected to your
computer and turned on, initialize and format your new volume. If you need
help initializing and formatting your drive, see the Formatting Guide, located
on our Downloads page:
11. After initializing and formatting, your drive will be ready to use!
If you have any questions, visit our websit
for FAQs,
manuals and more, or contact us at
.
15