Torbal Industrial Bench Scales - Manual (Page 2)

Configuring Sending Data Modes – Scale to PC
AD and AGC Models:
1. Press the M key
2. Wait for function “Print” (print) to appear and press the T key.
3. Wait for “Send” (Send) to appear and press the T key.
4. Once a desired sending mode is displayed press the T key to activate.
Stb (Stb)
Stable Stable weighing result is transferred from the scale after pressing the P key
Auto (auto) Automatic Weighing result is automatically transferred from the scale after it
stabilizes (no push key required)
Cont (Cont) Continuously Weighing results is continuously transferred from the scale at all times. (no
push key and no stability required)
AGCN and AGZN Models:
1. Press the MENU key
2. Wait for function “RS-232” (RS-232) to appear and press the T key.
3. Wait for “Sending” (SendING) to appear and press the T key.
4. Once a desired sending mode is displayed press the T key to activate.
b. P Stb (Stb)
Button plus
Stability Stable weighing result is transferred from the scale after pressing
the P key,
butt. P (Butt. P) Button Only Weighing result is transferred from the scale after pressing the P
key (no stability required)
Auto (auto) Automatic Weighing result is automatically transferred from the scale after it
stabilizes (no push key required)
Cont (Cont) Continuously Weighing results is continuously transferred from the scale at all
times. (no push key and no stability required)
AG and AGN Models:
1. Press the MENU key
2. Select Configuration
3. Select RS-232C or USB.
4. Use < > keys to select a data sending mode.
button + stab.
Button plus
Stability Stable weighing result is transferred from the scale after pressing
the key,
button only Button Only
Weighing result is transferred from the scale after pressing the
key (no stability required)
after stabil. Automatic Weighing result is automatically transferred from the scale after it
stabilizes (no push key required)
continuous Continuously Weighing results is continuously transferred from the scale at all
times. (no push key and no stability required)