Usb plus+ rfid reader specifications, Power, Dc power required – ThingMagic USB Plus+ RFID Reader User Manual
Page 11: Idle power consumption, Environment, Operating temp, Storage temp, Dc power required 11 idle power consumption 11, Operating temp 11 storage temp 11
USB Plus+ RFID Reader Specifications
11
A D I V I S I O N O F T R I M B L E
USB Plus+ RFID Reader
Specifications
Power
DC Power Required
DC Voltage: 5 VDC (Powered by USB interface)
DC Power: 2.9 W (570mA) max
Supplied interface cable terminates in two type-A plugs: one for power and signal, the
second for additional power, if necessary.
Idle Power Consumption
1.7 W max at idle
Power management modes can be used to reduce this to as little as 0.1W
Environment
Operating Temp
-20 C to +60 C
Storage Temp
-40C to +85C