Snow Joe iON18SB-RM Cordless Single Stage Snow Blower With Rechargeable Ecosharp 40 Volt Lithium-Ion Battery - Manual (Page 6)

6
Unpacking
Carton Contents:
• Cordless snow blower
• 40 V EcoSharp
™ battery
• EcoSharp ™ battery charger
• Safety key
• Manual
1. Carefully remove the snow blower and all other items from
the shipping carton.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call 1-866-766-9563.
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless snow
blower.
Assembly
Assembling the handles
1. For easy assembly, the snow blower comes equipped with
most of the parts already connected. In just a few simple
steps, your snow blower will be ready to go. To engage
the handle, pull up on the upper frame (Fig. 1).
2. Secure the connection of the middle frame to the upper
frame by fastening the handle locks on each side (Fig. 2).
3. Secure the connection of the lower frame to the middle
frame by fastening the handle knobs on each side
(Figs. 3 & 4).
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Handle knob