Snow Joe SB601E-RM SharperBlade Electric Stringless Trimmer/Edger - Manual (Page 9)

Maintenance
Before carrying out any maintenance operations, cut off the
electric power supply by disconnecting the plug from the
extension cable.
• Regular cleaning and maintenance of you grass trimmer will
ensure efficiency and prolong the life of your machine.
• After each cutting operation, take apart and clean out the
grass and soil from; the whole trimmer and guard.
• During operation, keep the air slots clean and free from
grass.
• Only use a cloth soaked with hot water and a soft brush to
clean the grass trimmer.
• Do not spray or wet the appliance with water.
• Do not use detergents or solvents as these could ruin the
trimmer. The parts in plastic can easily be damaged by
chemical agents.
• If cutting blade no longer cuts or breaks, have this replaced
by contacting an authorized service center.
m
CAUTION!
The blade can give deep cuts.
• For repairs which have not been explained in these
instructions, contact an authorized service center.
Trouble-Shooting
m
CAUTION!
Always disconnect the electric power supply before
conducting maintenance or troubleshooting.
• If the grass trimmer vibrates: remove the spool and clean
the slots, carefully remove any grass and weeds and so
forth. If vibration persists after reassembly, replace the
blade with a new one. In the evert of the problem not
disappearing, have the trimmer checked at an authorized
service center.
• If the trimmer does not start: check all the electrical
connections; make sure the safety circuit-breaker has not
been activated; check that a fuse has blown in your
electrical system. Take the trimmer to an authorized service
center if the trimmer does not start after completing the
checks.
Storage
Follow these recommendations for storing the grass trimmer.
• Carry out general cleaning of the grass trimmer and its
ancillary parts (see maintenance paragraph), this prevents
mould from forming.
• Store it out of the reach of children, in a stable and safe
position and in a dry place where the temperature is not too
hot or too cold.
• Store the trimmer in a location with minimal light, away from
direct sunlight.
• Do not store the grass trimmer resting on the floor. Hang it
by the upper handgrip instead, so that the guard does not
touch anything. The resting of the guard on a surface could
alter its shape and therefore its dimensions and safety
characteristics would be modified.
Service and Support
If your SharperBlade Electric Trimmer/Edger requires service or
maintenance, please call 1-866-766-9563 for assistance.
Model and Serial Numbers
When contacting the company or reordering parts, you will
need to provide the model and serial numbers of your product.
These are found on the decal affixed to the housing or guard
of your SharperBlade Electric Trimmer/Edger. Copy these
numbers into the space provided below.
9
Record the following numbers from the housing or handle of your
new product:
Model #:
Serial #:
S B 6 0 0 E R M