Snow Joe SJFP30 Fire Joe 30-Inch Steel Fire Pit - Manual (Page 4)

Unpacking
NOTE: Before beginning assembly, make sure that all of
the parts and hardware listed below are present. If any part
is missing or damaged, do not attempt to assemble the
product. Contact the Snow Joe ® + Sun Joe ® customer service
department at 1-866-SNOWJOE (1-866-766-9563).
Parts
1. Screen hook 4. Fire bowl
2. Screen 5. Connecting ring
3. Log grid
6. Leg (3)
Hardware
7. M6 x 8 mm bolt (9)
8. M6 ring screw
9. M6 flange nut
10. M6 nut (3)
Assembling the Fire Pit
Tools required (not included): Phillips screwdriver
Choose a soft and level location for assembly. Remove all
parts from the packaging, and check for missing parts.
1. Attach the 3 legs to the connecting ring using three
(3) M6 x 8 mm bolts and three (3) M6 nuts (Fig. 1).
2. Place the fire bowl upside down, and connect the legs to
the fire bowl using the remaining six (6) M6 x 8 mm bolts
(Fig. 2).
3. Attach the M6 ring screw to the top of the screen and
secure it with the M6 flange nut (Fig. 3).
Fig. 1
Hardware used: M6 x 8 mm bolt (3)
Leg
Connecting
ring
M6 x 8 mm
bolt
Hardware used: M6 nut (3)
M6 nut
Fig. 2
Hardware used: M6 x 8 mm bolt (x6)
Fire Bowl
M6 x 8 mm
bolt
Fig. 3
Hardware used: M6 ring screw
Hardware used: M6 flange nut
Screen
M6 ring screw
M6 flange
nut
4