COBY electronic TF-DVD1971 - Manual (Page 14)

14
Cable Connections
Do not connect the power until the first 3 connections have been made.
Connect TV RF sources to the coaxial TV antenna jack. TV RF sources may include: Over-
the-Air receiving antennas or cable lines. You can use a 75 ohm coaxial cable to connect
an outdoor antenna.
Connect Audio sources to the RCA Stereo Input jacks. Audio sources may include: DVD
players, VCRs, or camcorders. Match the red and white ends of the RCA AV cable to the
Red “L” and White “R” jacks on the rear panel of the TV.
Connect video sources to the Video Input jacks. Video sources may include: DVD players,
VCRs, or camcorders.
Choose one of 3 connections:
Composite Video (standard quality). Match the yellow end of the RCA AV cable to the
yellow Video jack on the rear panel of the TV .
S-Video (better quality). If the video source has an S-Video output jack, use an S-Video
cable to connect it to the S-Video input jack on the rear panel of the TV.
Component Video (best quality). The component vid-
eo connection must be used for high-definition video
(480i/p, 576i/p, 720i/p, 1080i). If the video source has
component video output jacks, use component video
cables to connect them to the component video input
jacks on the rear panel of the TV.
Insert one end of the AC power cord to the Power input
jack on the rear panel of the TV and the other end to
an AC 100-240V wall outlet.
1.
2.
3.
•
•
•
4.
GETTING STARTED
External Video Source
(DVD, VCR, Cable Box)
TV Antenna
(Cable Line, Antenna)