5 connecting to an ac socket, Connecting to an ac socket – Cisco 4305G User Manual
Page 11
11
•
If you will connect your DMP to an analog display,
do all of the following:
–
Plug the yellow jack on the RCA cable into the
CVBS interface on your DMP.
–
Plug the red jack on the RCA cable into the
AUDIO/RIGHT interface on your DMP.
–
Plug the white jack into the AUDIO/LEFT
interface on your DMP.
Step 2
Connect the other end of the cable (or cables) to the
corresponding interface (or interfaces) on your
DMP display.
Step 3
If the DMP display is not already turned on, turn it
on now.
5
Connecting to an AC Socket
Warning
Use only the supplied power adapter and plugs.