Curtis ENABLE 40 - Manual (Page 21)

15 Curtis enAble ® 40-Series Manual, Rev. B
Mode Button
With the chair in Drive and the joystick in neutral, pressing the Mode button
selects Mode 1 (actuator 1), and the appropriate portion of the chair icon lights
up. Moving the joystick to the right selects Mode 2 (actuator 2); moving the
joystick to the right again selects both modes. Moving the joystick to the right
yet again will return to Mode 1. To exit actuator mode, press the Mode button
again or move the joystick to the left.
The fill-in portions of the chair illuminate to show which actuator is
active. In this example, Actuator 1 is the seatback and Actuator 2 is both legs.
For programming, see Seat menu, page 28.
M
3 — USER HANDCONTROL
MODE BUTTON
PRESSED
(MODE 1)
JOYSTICK MOVED
TO RIGHT
(MODE 2)
JOYSTICK MOVED
TO RIGHT AGAIN
(MODES 1+2)
M