Sage Citrus Press 800CPUK - Manual (Page 9)

8
PAge heAder..... aSSemBlIng yoUR neW aPPlIanCe
aSSemBlIng tHe CItRUS PReSS
1. Pull the juice press arm up and
backwards, away from the motor
base, until fully extended.
2. Place the juice collector onto the
drive shaft on top of the motor base,
ensuring the juice spout fits into the
semi-circular groove at the front of
the motor base.
3. Insert the stainless steel filter into
the juice collector, aligning the
indent with arrow in the bottom of
the filter over the corresponding tab
with arrow in the juice collector.
4. Place the juicing cone onto the drive
shaft and press down lightly to lock
the cone into position.