Sage Kinetix Control BBL605UK - Manual (Page 14)

13
PAge heAder..... HIntS & tIPS
ProBLem eaSy SoLUtIon
motor doesn’t start or blade
doesn’t rotate. Check that the blender jug and lid are securely
into position.
Check that the POWER button and selected function or
speed setting is illuminated.
Check that the power plug is securely inserted into the
power outlet and switched on.
food is unevenly chopped. Either too much food is being blended at one time or
the pieces are too large. Try cutting food into smaller
pieces of even size and processing a smaller amount
per batch.
For best results, the food should be chopped into pieces
no larger than 2cm.
food is chopped too fine or
is watery. Blend for shorter period of time. Use PULSE function
for more control.
food sticks to blade and jug. The mixture may be too thick. Try adding more liquid
to the mixture and / or use a slower speed.
Blender overloaded. The Sage™ by Heston Blumenthal‰ Kinetix ™ Blender
features a motor protection feature. If the motor is
being overloaded the motor will stop and the overload
warning icon on the LCD will start to flash. Once
the icon stops flashing the blender has now cooled
down and you will be able to use the blender as per
instructions. At this point the blender will be in standby
mode and you will only need to press the function
/ button that you require to start blending again.
However if you have turned the blender off you will
need to switch it back on and only if the icon has stop
flashing commence blending as usual.
• We recommend removing a portion of the mixture,
cutting food into smaller pieces or processing smaller
amounts per batch.