Cary Audio Design Audio CD Player - Manual (Page 19)

Using the CD 306 SACD as a Digital to Analog (D/A) Converter
1
1
2
2
3
5. Select "AES/EBU" ,"COAXIAL" or "TOSLINK"button.
Press the POWER button to turn on the power.
Press the COAXIAL button.
COAXIAL D-IN : NONE
D-OUT: NONE A-OUT: NONE
COAXIAL D-IN : 192k
D-OUT: 192k A-OUT: 192k
Analog Out is the first to appears on the display, then the external digital inputs sampling
frequency appears .(Example: External digital inputs sampling frequency is 192kHz)
* Digital input signal can be output in digital format and analog format.
* Only linear PCM signals with a sampling frequency of 32kHz, 44.1kHz,48kHz,88.2kHz,
176.4kHz or 192kHz can be played on this set. Do not input any digital signal other than
linear pulse code modulation (PCM) signals. (CD-ROM, Dolby Digital, DTS signals, etc.)
Doing so will generate output noise that could damage the speakers.
* When the digital sampling frequency is switched, the muting circuit is activated for 1 or 2
seconds, so the sound will stop momentarily and then start again each time the digital
sample rate is changed.