Miller Skyline 70 - Manual (Page 11)

10
Storage Service, Sales and Support
The Skyline 70 Fluid Head can be stored for extended periods;
Miller recommends storage in a Miller Soft Case and the
following:
• Remove battery.
• Clean the external surfaces.
• Keep in a dry place away from direct sunlight.
• Loosen off PAN & TILT LOCK.
Spare Parts and Accessories
ITEM ITEM NO.
Battery 12V P3798
Camera Plate Assembly (Includes 2 x 3/8”
screws) #1060
Camera screw 3/8” P0037
Camera screw 1/4” P0036
Telescopic Pan Handle assembly (including
Handle Clamp) #694
Telescopic Pan Handle #692
Multi Hard Case with wheels #318
Clamp nut P8459
Accessory Mounting Bracket Ass’y #1221
Accessory Mounting Adaptor Ass’y #1217
Mitchell Flat Base Adaptor #1226
Warranty
Please refer to warranty card for complete details.
Miller Authorised Service Agents must carry out all service
and repair work. Failure to observe this requirement may void
warranty. It is advisable to notify Miller or a Miller Authorised
Service Agent if a change of performance is observed as a result
of dropping or rough usage. For information regarding sales and
service of Miller products or for your nearest Miller representative
please contact us via our website or at the following:
MILLER CAMERA SUPPORT EQUIPMENT
30 Hotham Parade, Artarmon, Sydney,
NSW 2064 Australia
Tel: +61 2 9439 6377 Fax: +61 2 9438 2819
Email: [email protected]
MILLER Camera Support (LLC) USA
218 Little Falls Road, Cedar Grove, New Jersey 07009-1231 USA
Tel: (973) 857 8300 Fax: (973) 857 8188
Email: [email protected]
MILLER FLUID HEADS (EUROPE) LTD.
Unit 12A, Shepperton Business Park
Govett Avenue, Shepperton, Middlesex TW17 8BA
United Kingdom
Tel: +44 (0)1243 555255 Fax: +44 (0)1243 555 001
Email: [email protected]
www.millertripods.com