Mercedes-Benz E 320 Wagon 1999 Additions to Manual - Manual (Page 14)

64
Rear-Facing Bench Seat
The rear-facing bench seat can be
unfolded to enlarge the seating area.
By pressing down on the handle, lift the
backrest into place. Raise the seat cushion
in a similar manner.
Hook the safety belts into the brackets (1)
provided
Warning!
Prior to occupying the rear-facing
bench seat, the rear seat backrests
must be in an upright position and
locked in place.
To avoid possible injury to the rear-
facing bench seat occupants, the
bench should be used by no more
than two passengers not taller than
6 ft. (150cm).
Note:
If the rear-facing bench seat is to be
occupied, the forward-facing split rear
bench seat must be equipped with
head restraints.
To stow the rear-facing bench seat,
proceed in reverse order, pulling the
seat cushion up by its strap (2).