Mercedes-Benz E-class 1997 Special Settings - Manual (Page 43)

68
Garage Door Opener
1 Remote control transmitter
located on inside rear view
mirror
2 Portable remote control
transmitter
The visor remote control is capable of
operating up to three separately
controlled objects.
Warning!
When programming a garage door
opener, the door moves up or down.
When programming or operating the
remote control make sure there is no
possibility of anyone being harmed
by the moving door.
Notes:
Certain types of garage door openers
are incompatible with the integrated
opener. If you should experience
difficulties with programming the
transmitter, contact your authorized
Mercedes-Benz dealer or call
Mercedes-Benz Customer Assistance
Center (in the U.S.A. only) at 1 -800-
FOR-MERCedes.
Programming or reprogramming the
remote control:
1. Turn electronic key in steering
lock to position 1 or 2.
2. Press and hold one button of
the remote control located on
the inside rear view mirror until
its control light begins to flash at
a rate of about once a second.
Continue holding down the
button.
Note:
The light blinks immediately if the
remote control is being
programmed for the first time, or if
its memory was previously erased.
If you are reprogramming a
previously used button, the light
will flash after about 20 seconds.
3. Hold end opposite to battery of
portable remote control against
the inside rear view mirror trans-
mitter to be programmed. While
still holding down the button on
the transmitter on the inside rear
view mirror, press down the
button on your portable remote