Mercedes-Benz M-Class 2003 COMAND Manual - Manual (Page 76)

73
Telephone
Telephone operation
If the system detects an incoming call, the
phone rings and “
CALL” appears on the
display. If the telephone number can be
identified, it appears in the display. The
corresponding name is displayed as long
as it has been stored in the phone book.
̈ Press .
The active audio source switches to
mute.
Switching off the microphone for the hands-
free telephone
̈ Press the softkey “ MUTE”.
̈ Press the softkey “ MUTE” again to can-
cel muting.
Setting the volume for hands-free operation
Raising the volume
̈ Turn the rotary/push-button v to the
right.
Lowering the volume
̈ Turn the rotary/push-button v to the
left.
Refusing or ending a call
̈ Press .
The main telephone display disappears
and the previous source is restored.
Accepting an incoming call using the mo-
bile telephone handset
For the location of your telephone, see the
vehicle’s operation instructions.
̈ Press .
̈ Remove the telephone from its cradle
and conduct your call.
The hands-free operation switches off.
Ending a call
̈ Put the phone back in its cradle.
Incoming call