Mercedes-Benz M-Class 2006 COMAND Manual User Manual
Page 57

55
Audio
CD operation
1 Ejecting audio CD
2 Opening/closing the display unit
3 Warning message 
Press EJECT to
close
̈
With the COMAND switched on, press 
l.
The display unit moves forward and 
then tilts down. The CD AUDIO slot is 
visible.
̈
Press the
l button left of the
CD AUDIO slot to eject a CD already 
loaded.
̈
Remove the CD from the slot.
̈
Insert a CD into the slot. The CD should 
be inserted with the label side up.
The COMAND pulls the CD in.
̈
Press
l on the display unit to return
the display unit to its closed position.
The display unit tilts up and then moves 
to the rear.
Playback begins with track number 
one.
The message
CD error
will appear if
there is a media error.
̈
Remove the CD or switch to 
another operation.
Warning
G
The display unit can cause injury if
contacted when open. Please close after
inserting an audio CD.
!
Do not place anything on the lowered 
display panel (i.e. do not attempt to use 
as a shelf). Placing objects on the 
lowered display panel may result in 
damage to the display or COMAND 
unit which is not covered by the 
Mercedes-Benz Limited Warranty. 
!
Inserting a second CD with another CD 
still loaded will cause damage to the 
CD drive which is not covered by the 
Mercedes-Benz Limited Warranty.
i
The message
Press EJECT to
close
will appear. If
l on the
display unit is not pressed within 20 
seconds, eight successive series of two 
beep tones will sound to remind you to 
return the display to its closed position 
by pressing 
l on the display unit.
The active audio source will be muted 
until the display has been returned to 
its closed position. If you do not do so, 
the COMAND returns the display unit 
to its closed position.
