beautypg.com

171 controls in detail – Mercedes-Benz G-Class 2008 Owners Manual User Manual

Page 172

background image

171

Controls in detail

Transfer case

Switching from HIGH to LOW

̈

Press upper half (“LOW”) of the
transfer case switch.
Once the shift is complete, gear
position

L

appears in the transfer case

indicator 1 (

page 170).

̈

Move the gear selector lever to drive
position

D.

Switching from LOW to HIGH

̈

Press lower half (“HIGH”) of the
transfer case switch.
Once the shift is complete, gear
position

H

appears in the transfer case

indicator 1 (

page 170).

̈

Move the gear selector lever to drive
position

D.

Warning!

G

Always wait until the procedure of shifting
from HIGH to LOW – and from LOW to HIGH
– has been entirely completed. During this
procedure do not:

ț

switch off the engine

ț

shift the automatic transmission into
another gear

If you do not wait until the shifting proce-
dure has been entirely completed then it
might not be correctly performed. The
transfer case might be in neutral, thus inter-
rupting the transfer of power between the
engine and the drive axle.

The vehicle is then freely movable, even if a
gear has been selected, and could uninten-
tionally be set into motion – particularly on
up – or downhill grades. This could lead to
an accident and cause injury to yourself and
others.

Please observe related messages appearing
in the multifunction display (

page 172).

!

The shift procedure can only be performed

when:

ț

the engine is running

ț

the gear selector lever for the automatic
transmission is in neutral position

N

ț

the vehicle is not at standstill

ț

the vehicle speed does not exceed 25 mph
(40 km/h)

i

If the shift procedure does not take place

press upper half (“LOW”) of the transfer case
switch once more.

!

The shift procedure can only be performed

when:

ț

the engine is running

ț

the gear selector lever for the automatic
transmission is in neutral position

N

ț

the vehicle is not at standstill

ț

the vehicle speed does not exceed 40 mph
(70 km/h)

i

If the shift procedure does not take place

press lower half (“HIGH”) of the transfer case
switch once more.

W463.boo Seite 171 Montag, 19. November 2007 8:41 08