Mercedes-Benz M-Class 2008 Owners Manual - Manual (Page 162)

161
Controls in detail
Control system
Operating CD player
Selecting CD track
̈ Turn on the COMAND system and
select CD. Refer to separate COMAND
system operating instructions.
̈ Press button è or ÿ repeatedly
until the settings for the CD currently
being played appear in the multifunc-
tion display.
1 Current CD (for CD changer*)
2 Current track
̈ Press button k or j repeatedly
until the desired track is selected.
Selecting MP3-CD track
̈ Turn on the COMAND system and se-
lect MP3. Refer to separate COMAND
system operating instructions.
̈ Press button è or ÿ repeatedly
until the settings for the MP3-CD
currently being played appear in the
multifunction display.
1 MP3 mode
2 Current track
̈ Press button k or j repeatedly
until the desired track is selected.
NAV* menu
The NAV menu contains the functions
needed to operate your navigation system.
̈ Press button è or ÿ repeatedly
until the message NAV appears in the
multifunction display.
The message shown in the multifunction
display depends on the status of the navi-
gation system:
ț With the COMAND system switched
off, the message
NAV off appears in
the multifunction display.
ț With the COMAND system switched on
but route guidance not activated, the
direction of travel and, if applicable, the
name of the street currently traveled
on appear in the multifunction display.
ț With the COMAND system switched on
and route guidance activated, the di-
rection of travel and maneuver instruc-
tions appear in the multifunction
display.
i Vehicles with CD changer*: To select a CD
from the CD changer magazine, press a number
on the COMAND system key pad located in the
center console.