Mercedes-Benz S-Class Hybrid 2010 - Manual (Page 34)

Identification labels
i For more information on the identification
labels, refer to the Operator’s Manual.
Electric drive
The engine number is engraved on the
housing of the electric drive. For more
information contact an authorized Mercedes-
Benz Center.
Vehicle specification S 400 HYBRID
(221.195)
The quoted data apply only to the standard
vehicle. Contact an authorized Mercedes-
Benz Center for the corresponding data of all
special bodies and special equipment.
Engine S 400 HYBRID
Engine, type 272
Mode of operation 4-stroke engine,
gasoline injection
No. of cylinders 6
Bore 3.66 in (92.90 mm)
Stroke 3.39 in (86.00 mm)
Total piston
displacement
213.5 cu in
(3 498 cm 3 )
Compression
ratio
11.7:1
Output acc. to
SAE J 1349
1
275 hp/6 000 rpm
(205 kW/6 000 rpm)
Maximum torque
acc. to SAE J 1349
258 lb-ft/
3 000 - 5 500
(350 Nm/
3 000 - 5 500 rpm)
Engine S 400 HYBRID
Maximum engine
speed
6 500 rpm
Firing order 1-4-3-6-2-5
Poly-V-belt 2 404 mm
Electric drive S 400 HYBRID
Type Permanent-field
synchronous motor
Output 20 hp (15 kW)
Maximum
starting torque
160 Nm
Electrical system S 400 HYBRID
Alternator 14 V/180 A
Battery 12 V/95 Ah
Spark plugs, type Bosch Y 7 MPP33
Spark plugs,
electrode gap
0.031 in (0.8 mm)
Spark plugs,
tightening torque
15 - 18 lb-ft
(20 - 25 Nm)
Main dimensions S 400 HYBRID
Overall vehicle
length
206.7 in (5 250 mm)
Overall vehicle
width
2
83.5 in (2 120 mm)
Overall vehicle
height
58.2 in (1 479 mm)
Wheelbase 124.6 in (3 165 mm)
Track, front 63.0 in (1 600 mm)
1 Premium fuel required. Performance may vary with fuel octane rating.
2 Exterior rear view mirrors folded out.
32
Technical data
221_ZA; 1; 21, en-US
d2ureepe,
Version: 2.11.8.1
2009-05-13T13:56:31+02:00 - Seite 32