Mercedes-Benz E-Wagon 2013 Owners Manual - Manual (Page 214)

Switching on Night View Assist Plus
Activation conditions
You can only activate Night View Assist Plus
if:
R
the SmartKey is in position 2 in the ignition
lock.
R
it is dark.
R
the light switch is in the à or L
position.
R reverse gear has not been engaged.
Switching on Night View Assist Plus
X Make sure that COMAND is switched on.
X Press button :.
The Night View Assist Plus display appears
in the COMAND display.
You can read about how to adjust the
brightness of the COMAND display in the
COMAND operating instructions.
i The infrared lamps switch on
automatically from a speed of about
6 mph (10 km/h). This means that you do
not have the full visual range while the
vehicle is stationary and cannot check
whether Night View Assist Plus is working.
Pedestrian recognition
G WARNING
Pedestrian recognition may be impaired or
inoperative if:
R pedestrians are partially or entirely
obscured by objects, e.g. parked vehicles.
R the silhouette of the pedestrian in the Night
View Assist Plus display is incomplete or
interrupted, e.g. by powerful light
reflections.
R pedestrians do not contrast with the
surroundings.
R pedestrians are not standing upright, for
example, if they are sitting, crouching or
lying down.
: Night View Assist Plus display
; Pedestrian recognized
= Framing
?
Symbol for active pedestrian recognition
i Animals are not recognized by pedestrian
recognition.
Night View Assist Plus is able to recognize
pedestrians by typical characteristics, e.g. a
silhouette in the shape of a person.
Pedestrian recognition is then switched on
automatically if:
R
Night View Assist Plus is activated.
R you are driving faster than 6 mph
(10 km/h).
R
the surroundings are dark, e.g. when
driving outside built-up areas without
street lighting.
212
Driving systems
Driving and parking