On-board computer and displays, Menus and submenus – Mercedes-Benz E-Cab 2013 Owners Manual User Manual
Page 226
Instrument cluster
Selecting the unit of measurement for
distance
The
Display Unit Speed-/Odometer:
function allows you to choose whether
certain displays appear in kilometers or miles
in the multifunction display.
You can determine whether the multifunction
display shows some messages in miles or
kilometers.
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Inst. Cluster
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Display Unit Speed-/Odometer:
function.
You will see the selected setting:
km
or
miles
.
X
Press the a button to save the setting.
The selected unit of measurement for
distance applies to:
R
the digital speedometer in the
Trip
menu
R
odometer and the trip odometer
R
trip computer
R
current consumption and the range
R
the navigation instructions in the
Navi
menu
R
cruise control
R
DISTRONIC PLUS
R
ASSYST PLUS service interval display
Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Inst. Cluster
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Permanent Display:
function.
You will see the selected setting
Outside
Temperature
or
Speedometer [km/h]
(USA)/
Speedometer [mph]
(Canada).
X
Press the a button to save the setting.
i
The speed is shown in km/h (USA)/mph
(Canada).
Lights
Switching the daytime running lamps on/
off
i
This function is not available in Canada.
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
X
Press : or 9 to select the
Day
Lights:
function.
If the
Day Lights:
have been switched on,
the cone of light and the W symbol in
the multifunction display are shown in red.
X
Press the a button to save the setting.
Further information on daytime running
lamps (
Y
page 121).
Switching Adaptive Highbeam Assist on/
off
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Adaptive Highbeam
function.
If the
Adaptive Highbeam
function has
been switched on, the cone of light and the
_ symbol in the upper multifunction
display are shown in red.
X
Press the a button to save the setting.
224
Menus and submenus
On-board computer and displays