Mercedes-Benz C-Coupe 2013 Owners Manual - Manual (Page 118)

X To open: turn rotary catch : 90° in the
direction of the arrow and remove side trim
panel ;.
X
To close: insert side trim panel ; and turn
rotary catch : 90° in the opposite
direction to the arrow.
Tail lamp
X
Switch off the lights.
X Open the trunk.
X Open the side trim panel (
Y
page 115).
X Remove the tail lamp connector
X Simultaneously press retaining lugs : in
the direction of the arrow and slightly pull
out the bulb holder with the bulbs.
X
Remove the connector for LED light
functions from the top of the bulb holder.
X Pull the bulb holder out with the bulbs.
: Backup Light
; Brake lamp
= Parking lamp/brake lamp
X Press the respective bulb :, ; or = back
and turn it counter-clockwise to remove it
from the bulb holder.
X
Insert the new bulb into the bulb holder and
turn it clockwise.
X Reinsert the connector for LED light
functions in the bulb holder.
X
Insert the bulb holder again and lock it in
place.
X Insert the tail lamp connector.
X Close the side trim panel (
Y
page 115).
Windshield wipers
Switching the windshield wipers on/
off
! Do not operate the windshield wipers
when the windshield is dry, as this could
damage the wiper blades. Moreover, dust
that has collected on the windshield can
scratch the glass if wiping takes place when
the windshield is dry.
! If the windshield wipers leave smears on
the windshield after the vehicle has been
washed in an automatic car wash, wax or
other residues may be the reason for this.
Clean the windshield using washer fluid
after washing the vehicle in an automatic
car wash.
Combination switch
1
$ Windshield wiper off
2 Ä Intermittent wipe, low 3
3 Rain sensor set to low sensitivity.
116
Windshield wipers
Lights
and
windshield
wipers