Mediasonic BRC-2531 - Manual

Power/Pair Button
Dock
Connector
1. Once connected for the first time, the
unit should turn on automatically.
If the unit does not power on, press
and hold the Pair button for 3+
seconds to power the unit on.
The Pair /Power Indicator
will flash slowly.
A beep will sound when the
unit has been recognized.
2. Repeat step one to power the unit off.
The Pair /Power Indicator will turn off.
1. Set your iPod audio device
to iPod mode.
Refer to the user’s manual for your
specific device for instructions.
2. Connect the BRC-2531 using
the Dock Connector.
Power
Pairing Connecting
1. Once the unit has been recognized,
the Pair /Power Indicator will
flash slowly when searching, then
quickly to enter pairing mode.
If the unit does not enter pair
mode automatically, press the
power/Pair button once.
2. Using the native controls
on your Bluetooth device,
select the “BRC-2531” to pair.
If your device requests a password,
enter the default password “ 0 0 0 0 ”.
Refer to the user’s manual for your
specific device for instructions on pairing
and connecting Bluetooth devices.
3. Press and Hold the Power/Pair button
to turn off and disconnect the BRC-2531.
Status Indicator
Power Off No light
Searching Slow flashing light
Pairing Quickly flashing light
Connected Solid light
PAIR
PAIR
Pair
Indicator