Lifesmart LS2001FRP-WD - Manual (Page 11)

11
OPERATING INSTRUCTIONS
1 . Turn the heater on or off by pressing the Power
button on the control panel (C) or by pressing the
ON/OFF button on the remote control (B) .
Once the power is off, heating elements will stop
working first . The fan will continue working for up to 3
minutes to dispense residual heat inside the heater .
This is a normal function .
1
ON/OFF
POWER
C B
2 . Select a heat setting by pressing the MODE button
on either the control panel (C) or the remote control
(B) to toggle between the two heat settings .
Power for heat-up mode is 1,500 W; heat-down is
1,000 W .
2
High Low
C B
H / L
3 . Set the thermostat by pressing the arrows on the
control panel (C) or the remote control (B) .
You can set the temperature on the heater anywhere
between 50°F and 90°F or between 10°C and 32°C .
Once you have chosen the desired temperature,
the heater will remain on until the room temperature
increases to the temperature on the digital display .
The heater will cycle on and off to maintain the
desired room temperature .
Press the °C/°F button on the control panel (C) to
switch the digital display indicator on the heater
between Fahrenheit and Celsius .
3
C
B
C
OR
TEMP UP TEMP DOWN