Lifesmart LS2003FRP13-D - Manual (Page 12)

12
OPERATING INSTRUCTIONS
4 . To power on or adjust the flame effect brightness,
press the Dimmer button on the control panel (C) or
remote control (B)
Note: The flame effect function can be set when the
heater is in the on or off mode .
The unit will cycle between, high, medium, low and
off brightness levels
4
C
B
Dimme
r
5 . To replace the batteries, remove the battery cover
(1) from the remote (B) by applying pressure to the
battery cover (1) and sliding it away from the remote
(B) . Insert two AAA batteries (not included) (2) and
close the remote by placing the battery cover (1)
back on the remote (B) .
5
B
1 2