Lifesmart MH-1500 - Manual (Page 11)

11
OPERATING INSTRUCTIONS
1 . Turn the heater on or off by pressing the Power
button on the control panel (C) or by pressing the
ON/OFF button on the remote control (B) .
Once the power is off, heating elements will stop
working first. The fan will continue working for up
to 90 seconds to dispense residual heat inside the
heater . This is a normal function .
2
C B
ON/OFF
2 . Select a heat setting by pressing the HEAT button on
either the control panel (C) or the remote control (B)
to toggle between the three heat settings .
Power for heat-up mode is 1,500 W; heat-down is
750 W . ECO mode is an Economic Energy Saving
Function . When ECO mode is chosen, the heater will
operate to maintain a constant warm 68°F
3
HIGH LOW ECO
C B
MODE
3 . Set the thermostat by pressing the arrows on the
control panel (C) or the remote control (B) .
You can set the temperature on the heater anywhere
between 50°F and 97°F or between 10°C and 36°C .
Once you have chosen the desired temperature,
the heater will remain on until the room temperature
increases to the temperature on the digital display .
The heater will cycle on and off to maintain the
desired room temperature .
Press the °C/°F button on the control panel (C)
or remote control (B) to switch the digital display
indicator on the heater between Fahrenheit and
Celsius .
4
C
B
C
B
TEMP.
DOWN
TEMP.
UP
OR
°C/°F
°C/°F
OR