Lifesmart S-2PC-1000B - Manual (Page 12)

12
OPERATING INSTRUCTIONS
3 . To set the timer power off, start the unit and press
the Timer button on the control panel (C) or remote
control (B) .
Note: The timer-power-off function can only be set when
the heater is in power-on mode .
The digital display on the control panel (C) changes
from the set temperature readout to a time value
for the timer . Press the Timer button repeatedly to
change the number value between a range of 0 to 12
hours (in 1-hour intervals) .
The Timer light turns on when the timer is set .
3
C B
TIMER
TIMER
TIMER
4 . To set the timer power on, while powering off the unit
press the Timer button on the control panel (C) .
Note: The timer-power-on function can only be set when
the heater is in power-off mode .
The digital display on the control panel (C) will
indicate time value for the timer . Press the Timer
button repeatedly to change the number value
between a range of 0 to 12 hours (in 1-hour
intervals) .
The Timer light turns on when the timer is set .
4
C B
TIMER
TIMER
TIMER
5 . To replace the batteries, remove the battery cover
(1) from the remote (B) by applying pressure to the
battery cover (1) and sliding it out from the remote
(B) . Insert one CR2025 battery (2) and close the
remote by placing the battery cover (1) back inside
the remote (B) .
5
B
1 2