Lifesmart LS-3ECO - Manual (Page 11)

11
OPERATING INSTRUCTIONS
1 . Turn the heater on or off by pressing the Power
button on the control panel (C) or by pressing the
ON/OFF button on the remote control (B) .
Once the power is off, heating elements will stop
working first . The fan will continue working for up to 3
minutes to dispense residual heat inside the heater .
This is a normal function .
1
POWER
C B
2 . Select a heat setting by pressing the MODE button
on either the control panel (C) or the remote control
(B) to toggle between the three heat settings .
Power for heat-up mode is 1,500 W; heat-down is
1,000 W . ECO mode is an economic energy saving
function . When ECO mode is chosen, the heater will
operate to maintain a constant warm 68°F .
2
HIGH LOW ECO
H / L / E
C B
3 . Set the thermostat by pressing the arrows on the
control panel (C) or the remote control (B) .
You can set the temperature on the heater anywhere
between 50°F and 97°F or between 10°C and 36°C .
Once you have chosen the desired temperature,
the heater will remain on until the room temperature
increases to the temperature on the digital display .
The heater will cycle on and off to maintain the
desired room temperature .
Press the °C/°F button on the control panel (C) to
switch the digital display indicator on the heater
between Fahrenheit and Celsius .
3
C
C
B
TEMP.
UP
ºC/ºF
TEMP.
DOWN
OR