Chamberlain RFDI - Manual (Page 2)

2
Assemble
Intercom
Step 1: Install 4 AA Alkaline batteries (not provided).
(Lithium batteries recommended for colder
environments.)
Step 2: Adhere rubber pads to bottom.
Repeat Steps 1 and 2 for any additional intercoms.
Install 4 AA Alkaline batteries (not provided). (Lithium
batteries recommended for colder environments.)
Doorbell
Program Intercom to Doorbell
Step 1: On the doorbell, place
Dipswitch #1 to the OFF
position.
Step 2: Press the Learn
button on the intercom until a
beep is heard.
Step 3: Within 10 seconds
press the Learn button on the
doorbell until a beep is heard.
Mount Doorbell
Step 1
Mount doorbell with small silver screws. Screw the
top two screws halfway into the mounting surface.
Place back of doorbell over screws. Tighten screws.
The doorbell can be mounted by using the included
screws or by using the double-sided mounting tape. It
is recommended to use the mounting tape on
surfaces such as metal or glass.
Mounting with Screws
Put the remaining silver screws into the bottom holes
of doorbell. Tighten screws.
Step 2