Technical description, Instructions – Krampouz Authentic User Manual
Page 8

- 8
-
§
Do not put the appliance nor its cable on or near a hot surface (electric hotplate, hot gas burner,
heated oven etc).
§
Disconnect the plug when the appliance is not in use or before cleaning.
§
The appliance must not be cleaned with a high or low pressure jet.
§
Do not bleach.
§
Do not handle the appliance while hot.
§
Do not touch the hot surfaces.
§
Leave the appliance to cool prior to handling or cleaning it.
§
Place the appliance on a dry and stable surface, and slightly back from the edge and at least 20
cm from any wall or element liable to be affected by heat.
§
Take care: Do not insert a sheet of tin foil or any other material or object (risk of damage)
between the plate and the frame (ventilation area).
§
Do not block the ventilation holes of the plastic base, under the frame.
§
Caution: Do not use this device with wood or coal to other energy source than that for which it
provides (electrical energy).
§
When not in use, store the appliance in a dry place.
§
We recommend you keep the original packaging in order to store the appliance.
KEEP THESE INSTRUCTIONS
Technical description
Characteristics
- Removable enameled cast iron griddle, certified for contact with food (400 x 245 mm)
- Stainless steel frame
- Indicator light to signal heating
- Protection screen against the wind
- Power rating: 2000 W in 230 V
- Weight: 8,3 kg
This appliance complies with the EC directives.
Instructions
- Place the unit on a flat surface. Do not use it on a support sensitive to heat.
- Preheat the griddle by setting at the selected temperature for 15 min
- Arrange the food on the plate and make cooking at your convenience.
Work surface
Choose an easy-to-clean work surface on which to install the appliance. This appliance must be at
least 20 cm from any vertical surfaces that are not heat -resistant. To ensure maximum ease of use, the
appliance should be between 85 and 95 cm from the ground.