Krampouz Yello - Manual (Page 8)

- 8 -
§ Do not handle the appliance while hot.
§ Do not touch the hot surfaces.
§ Leave the appliance to cool prior to handling or cleaning it.
§ This device is prohibited outside.
§ Place the appliance on a dry and stable surface, and slightly back from the edge and at least 20 cm
from any wall or element liable to be affected by heat.
§ Take care: Do not insert a sheet of tin foil or any other material or object (risk of damage) between
the plate and the frame (ventilation area).
§ Do not block the ventilation holes of the plastic base, under the frame.
§ Caution: Do not use this device with wood or coal to other energy source than that for which it
provides (electrical energy).
§ We recommend you keep the original packaging in order to store the appliance.
KEEP THESE INSTRUCTIONS
Technical description
Characteristics
- Plate Ø 31 cm
- Non-stick coating, certified for contact with food
- Adjustable thermostat (Yello) or pre-set thermostat (Crep’Magic)
- Indicator light to signal heating
- Plastic frame
- Power rating: 1100 W in 230 V / 240 V
- Weight: 2 Kg
Accessories supplied
- Measuring ladle
- A spatula
- A wood spreader
This appliance complies with the EC directives.
Installation
Prepare the ingredients required depending on the type of crepe you want to make.
Place the appliance 20 cm away from any wall or any element sensitive to heat.
Unwind and connect the cable securely: firstly to the socket of the appliance and then to the mains socket.
The indictor light will then go on.
For the Yello crepe maker, adjust the cooking temperature using the slider in accordance with the
instructions given in the recipes below.
The light goes off when the appliance is ready to use (wait approximately 6 or 7 min.).
Take a cotton cloth (or paper towel) lightly greased in oil.
Before the first crepe and in between every crepe, clean the hot plate with this cloth (without adding oil).