Channel Vision 6128 - Manual (Page 23)

22
(2) Four TITLE Setup Positions (TITLE/ ID/ ZOOM):
RIGHT DOWN/ LEFT UP/ RIGHT UP/ LEFT DOWN (Default Setup: RIGHT
DOWN).
(3) Four ID Setup Positions:
RIGHT DOWN/ LEFT UP/ RIGHT UP / LEFT DOWN (Default Setup: RIGHT
DOWN).
(4) Four ZOOM Setup Positions:
RIGHT DOWN/ LEFT UP/ RIGHT UP/ LEFT DOWN (Default Setup:
RIGHT DOWN). Default Setup for Title/ ID/ ZOOM Display is “ON”.
(5) DEFAULT: Return to Default Setup.
(6) RETURN: Return to previous status.
2. SHARPNESS: Video sharpness level setup: 0 ~15 (Default Setup: 8).
3. POSI/ NEGA: Images can be set to POSI (Positive Image) or NEGA (Negative
Image). (Default Setup: POSI).
4. Four Types of MIRROR Mode: OFF/ HORIZONTAL/ VERTICAL/
ROTATE (Default Setup: Off).
5. FREEZE: Set FREEZE to “ON” to enable still field image (Default Setup: Off).
6. SYNC: Set to internal sync when using a DC 12V adaptor (Default Setup: INT).
And to line-lock sync when using an AC 24V adaptor.
7. V PHASE: When L/L mode is selected, you can adjust the desired phase (0 ~
358), otherwise it is an NA (Not Available) item (Default Setup: NA).
8. IRIS ADJ: When replacing the lens, face the camera toward the light, and then
Select the option “ADJ”. Message “ADJ…” means that adjustment is in progress, approx.
about 10 ~ 30 seconds afterward a message “ADJ OK” appears indicates that
the adjustment has been completed. When the message “Time Out” or “ADJ
ERR” appears indicates that the adjustment has failed.
9. LANGUAGE: Select English/ Chinese as your OSD language display.
10. DEFAULT: Return to Default Setup.
11. RETURN: Return to previous status.