Cradlepoint Cellular Modem Charging Cradle PS6PMCW - Manual (Page 7)

User’s Guide for Modem Charging Cradle PS6PMCW 7
•
Create a new connection using these settings:
−
Name: Custom
−
Connect to: Modem
−
Via: Cradle/Cable
−
Dialing: TouchTone
•
Select Details
−
Speed: 57,600 bps
−
Flow Ctl: Off
−
Init String: +CGDCONT=1,”IP”,”isp.cingular”;
•
Select OK to save the details, then OK to save a new
connection
•
Open Preferences from the Palm OS Main Menu
•
Select Communication → Network then insert these settings:
−
Service: Cradle
−
User Name: [email protected]
−
Password: CINGULAR1
−
Connection: Custom
−
Phone: *99***1#
•
Select Details:
−
Connection Type: PPP
−
Idle Timeout: Never
−
Query DNS: Checked
−
IP Address: Checked Automatic
•
Select Script:
−
Verify the only Script is : ▼ End
•
Select OK
•
Select OK
•
Select Done.
Making the Connection
Perform the following steps:
1. Turn on the Palm Tungsten E2.
2. Place the Palm Tungsten E2 into the Modem Charging Cradle
3. The cradle LED should alternately flash Green and Orange for
approximately15-20 seconds and then go solid Green. The
system is now ready to make a connection.
a. Open Prefs from the Palm OS Main Menu.
b. Select Communication → Network
c. Select Connect
4. Once the connection is established you can access the internet.