Koala Kare KB112-01CT - Manual (Page 3)

Countertop Mounted Baby Changing Station
Model Number KB112-01CT
INSTALLATION INSTRUCTIONS
Step 1
Remove the Koala Countertop Baby
Changing Station (BCS) from the
shipping carton and check for freight
damage.
Step 2
Place the Countertop BCS onto
counter surface and place in desired
position. Using the Countertop BCS
mounting holes as a guide, mark the
screw hole locations with a pencil.
Remove Countertop BCS and drill
holes with 5/32” diameter drill bit. Drill
down 3/4” deep.
Step 3
Place Countertop BCS onto counter surface using the drilled holes as a guide.
Slide screw through the screw cover base. Screw fasteners through holes into
countertop surface. Securely snap screw cover onto screw cover base. Apply
a suitable water sealant (not provided) such as silicone around the base of the
Countertop BCS unit.
Step 4
Stock with sanitary bed liners.
*Note: If drilling into marble or granite, take care to not crack or chip the
surface area while drilling. Larger drill bit may be necessary.