Kendon STAND-UP MOTO LIFT - Manual (Page 4)

714‐630‐7144 www.KendonUSA.com
‐ 2 ‐
WARNING: Top scissor must be fully collapsed and the two (2) black
knobs on top scissor must be tightened before storage or
relocation to avoid any pinching type injury.
WARNING: Keep hands and feet away from pinch points during raising
and lowering of the lift. Keep children away from lift at all
times.
WARNING: Do not store or place any objects underneath the lift. Keep
the bottom of lift section clear to avoid injury or crushing.
WARNING: Do not exceed lift capacity (600 lbs.)
Kendon is not responsible for any consequential damage(s).
IMPORTANT
You must follow the included assembly instructions prior to using the
Moto Lift.
714‐630‐7144 www.KendonUSA.com
‐ 7 ‐
Added Benefit, Care and Maintenance
It is perfectly acceptable to use the Moto Lift to elevate your motorcycle for
washing and cleaning a well ridden dirt bike. The lift can be hosed off and
cleaned just like your bike. All pivot points are factory greased. Spraying
lubricant on pivot joints is recommended after cleaning and on a routine basis.
IMPORTANT NOTE: To properly store the top scissor assembly, remove it
from the lift, fully collapse it, and tighten the two (2) black side knobs on
the top scissor. This will prevent the top from opening and closing to
prevent any pinching type injury. The lift top can be stored on end; it is
recommended to use a chain or strap to secure the lift to a wall to avoid
accidental tip over. Keep children away from lift at all times.