Tools required – Karcepts KRB02 User Manual
Page 2
Parts Included In Radiator And Reserve Tank Relocation Kit
DESCRIPTION QTY
UPPER RADIATOR SUPPORT BRACKET
1
RESERVE TANK BRACKET EXTENSION
1
M6 CAP SCREW
3
M6 LOCK WASHER
3
M6 NUT
1
Tools Required
Center Punch
Drill
Drill Bits – 5/16” thru 3/8” recommended
Chisel
Hammer
10mm Socket
Sharpie Marker
Tape Measure
C-Clamps
Welder
Die Grinder
Note: Read all instructions before attempting installation.
If you do not believe you are qualified in performing the
necessary installation and modifications to your chassis,
please find an experienced professional who can. Karcepts,
Inc. will not be held responsible for improper modifications to
your chassis. It is your job to make certain the lower radiator
support brackets are positioned properly and welded
securely.