CyberPower Systems UP825 - Manual (Page 4)

INSTALLING YOUR UPS SYSTEM
UNPACKING
Inspect the UPS upon receipt. The box should contain the following:
(1) UPS Unit; (1) PowerPanel Plus Software Disk; (1) Serial Interface Cable (DB-9);
(1) Telephone Cable; (1) User’s Manual; (1) Warranty Registration Card
HARDWARE INSTALLATION GUIDE
1. Connect the equipments to your UPS outlets. Items such as copiers, laser printers,
vacuums, space heaters, or other large electrical devices should not be connected to the
UPS. The power demand of your connected equipment cannot exceed the maximum
total power rating of your UPS.
2. Connect your UPS power cord into a two-pole, three-wire
grounding receptacle only. Please avoid using extension
cords and adapter plugs. (To maintain optimal battery
charge, leave the UPS plugged in at all times.)
3. Press the UPS power button to turn it on. The “Power On” indicator will be illuminated
Green.
4. Install your optional software and accessories. To use the software, simply connect the
enclosed serial interface cable to the serial port on the UPS and an open serial port on
the computer.
BASIC OPERATION
FRONT PANEL AND REAR PANEL DESCRIPTION
2