Jeep 2013 Patriot - User Guide - Manual (Page 88)

FLUIDS AND CAPACITIES
Component Fluid, Lubricant, or Genuine Part Capacities
Engine Coolant–
2.0L, 2.4L Engine
We recommend you use MOPAR ®
Antifreeze/Coolant Ten Year/150,000 Mile
Formula OAT (Organic Additive
Technology).
7.2 Quarts
(6.8 Liters)
Includes heater and
coolant recovery
bottle filled to
MAX level.
Engine Oil with
Filter– 2.0L,
2.4L Engine
We recommend you use API Certified
SAE 5W-20 engine oil, meeting the
requirements of Chrysler Material Stan-
dard MS-6395. Refer to the engine oil
filler cap for correct SAE grade.
4.5 Quarts
(4.26 Liters)
Fuel Selection–
2.0L, 2.4L Engine
87 Octane
13.6 Gallons
(51.5 Liters)
(Approximate)
Engine Oil Filter–
2.0L, 2.4L Engine
We recommend you use MOPAR ® Engine
Oil Filters.
—
Spark Plugs– 2.0L,
2.4L Engine
We recommend you use MOPAR ® Spark
Plugs (Gap 0.043 in [1.11 mm])
—
Automatic
Transmission (CVT)
We recommend you use MOPAR ®
CVTF + 4 ® Automatic Transmission Fluid.
—
Manual
Transmission
We recommend you use MOPAR ® ATF+4 ®
Automatic Transmission Fluid or
equivalent licensed ATF+4 ® product.
—
Rear Drive
Assembly (RDA)
We recommend you use MOPAR ® Gear &
Axle Lubricant SAE 80W-90 API GL 5.
—
Power Transfer Unit
(PTU)
We recommend you use MOPAR ® Gear &
Axle Lubricant SAE 80W-90 API GL 5.
—
Brake Master
Cylinder
We recommend you use MOPAR ® DOT 3
and SAE J1703 should be used If DOT 3
is not available, then DOT 4 is
acceptable.
—
Power Steering
Reservoir
We recommend you use MOPAR ® Power
Steering Fluid +4 or MOPAR ® ATF+4 ®
Automatic Transmission Fluid.
—
MAINTAINING YOUR VEHICLE
86