beautypg.com

Clock setting, Menu, Equalizer, balance and fade – Jeep 2012 Liberty - User Guide User Manual

Page 49: Display settings, Electronics

background image

• Your radio has many features that add to the comfort and convenience

of you and your passengers. Some of these radio features should not be
used when driving because they take your eyes from the road or your
attention from driving.

Clock Setting

• Turn the radio on, then touch the screen where the time is displayed.

• Touch the “USER CLOCK” soft-key.

• To adjust the hours, touch either the “HOUR FORWARD” or “HOUR

BACKWARD” soft-key.

• To adjust the minutes, touch either the “MINUTE FORWARD” or “MINUTE

BACKWARD” soft-key.

• To save the new time setting, touch the screen where the word “Save” is

displayed.

Menu

• Press the “MENU” hard-key to access the System Setup menu and the My

Files menu.

• Press the “MENU” hard-key in an active mode (SAT, CD, AUX, etc.) in

order to change mode specific settings.

Equalizer, Balance And Fade

Audio Control Menu

• Press the “MENU” hard-key on the

right side of the radio. Then press
the “Audio Control” soft-key to
get to the audio control menu.

• Use either the arrow soft-keys or

the cross-hair on the screen to
change Balance and Fade. The
“CENTER” soft-key resets the
settings.

• Touch the “Equalizer” soft-key and use either the arrow soft-keys or the

sliders on the screen to adjust BASS, MID, and/or TREBLE.

Display Settings

• Press the “MENU” hard-key and

touch the Display Settings
soft-key to access the Display
Settings menu.

• Select the “Daytime Colors”

soft-key to switch to manual
daytime mode and to adjust the
brightness of the display using
daytime colors.

• Select the “Nighttime Colors” soft-key to switch to manual nighttime

mode and to adjust the brightness of the display using nighttime colors.

ELECTRONICS

47