Ram Trucks MEDIA CENTER 430N for Jeep - Manual (Page 103)

NOTE: Garmin and Chrysler Group LLC are not re-
sponsible for the consequences of using a custom POI
database, or for the accuracy of the safety camera or other
custom POI databases.
After downloading a POI database to your computer, use
the Garmin POI Loader to install the POIs onto a DVD or
USB memory stick. The POI Loader is available at
www.garmin.com/products/poiloader. The DVD or USB
memory stick will be used to load the POIs to your
navigation system.
NOTE: Each time you load custom POIs to the naviga-
tion system, any other custom POIs already saved in the
system will be overwritten.
Loading Custom POIs
1. Using the POI Loader, create and save a POI.gpi file to
your computer.
2. Create a folder on a blank DVD or USB memory stick
titled Garmin. For example, if your DVD or USB memory
stick is listed as drive D on your computer, the folder
would be D:\Garmin.
3. Create a folder within the Garmin folder named Poi
(D:\Garmin\POI).
4. Copy the POI.gpi file to the Garmin\Poi folder on the
DVD or USB Stick (D:\Garmin\Poi\POI.gpi).
5. Insert the DVD or USB stick into the radio. The
navigation application will display a message that cus-
tom POIs are ready to be copied.
6. Touch Yes.
Finding Custom POIs
To view a list of the custom POIs loaded in your
navigation system:
1. Touch Where To?.
102 MEDIA CENTER 430/430N (RBZ/RHB)