Enabling and disabling parksenseĥ, Enabling and disabling parksense – Jeep 2012 Grand Cherokee - Owner Manual User Manual
Page 235
WARNING ALERTS
Rear Distance
(in/cm)
Greater than
79 in (200 cm)
79-39 in
(200-100 cm)
39-25 in
(100-65 cm)
25-12 in
(65-30 cm)
Less than
12 in (30 cm)
Audible Alert
Chime
None
Single 1/2
Second Tone
Slow
Fast
Continuous
Display Message
Park Assist
System ON
Warning Object
Detected
Warning Object
Detected
Warning Object
Detected
Warning Object
Detected
Arcs
None
3 Solid
(Continuous)
3 Slow
Flashing
2 Slow
Flashing
1 Slow
Flashing
Radio Mute
No
Yes
Yes
Yes
Yes
NOTE:
ParkSense
will MUTE the radio, if on, when
the system is sounding an audio tone.
Enabling And Disabling ParkSense
ா
ParkSense
can be enabled and disabled with a switch
located in the switch bank of the instrument panel or
through the Customer-Programmable Features section of
the EVIC. The available choices are: OFF, Sound Only, or
Sound and Display. Refer to “Electronic Vehicle Informa-
tion
Center
(EVIC)/Personal
Settings
(Customer-
Programmable Features)” in “Understanding Your In-
strument Panel” for further information.
When the ParkSense
switch is pressed to
disable the system, the instrument cluster will
display the “PARK ASSIST SYSTEM OFF” mes-
sage for approximately five seconds. Refer to
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
233